The process, step by step.
Check the Deck and the Old Finish
We find out what is on the wood now: a worn oil stain that cleans off, or paint and solid stain that has to be stripped. We look for loose fasteners and soft boards and fix small problems first. If a lot of boards are rotted, refinishing is the wrong job and we will tell you that resurfacing makes more sense.
Clean or Strip
A deck with a worn oil finish gets a wood cleaner and a careful power wash to lift dirt, mildew and grey fibres. A deck with paint or solid stain gets a chemical stripper first, so the new finish goes onto bare wood instead of a coating that is already failing.
Sand Back to Fresh Wood
Drum sanders on the floor boards and hand sanders on rails, stairs and edges. Sanding removes splinters and the weathered top layer and opens the grain so the oil soaks in evenly.
Oil Stain and Walk-Through
We brush on Benjamin Moore Woodluxe oil as standard, or Cutek Extreme as an upgrade, into every board, end and spindle. Then we walk the deck with you before we leave.
What you get.
Frequently asked.
See this work in action
Ready to Restore Your Wood?
Two minutes to a free quote, online or over the phone. On-site visit or remote photo-based estimate.
Serving St. Catharines, Niagara Falls, Welland, Burlington, Hamilton, and surrounding areas.





