Small problems become big ones fast.
A loose board is a trip hazard. A popped nail is a puncture wound waiting to happen. Rotted fascia lets water into your structure. These repairs aren't optional add-ons — they're essential before any finishing work.
Prevent Accidents
Loose boards, popped nails, and rotten planks cause trips, splinters, and worse. Repairs eliminate hazards before your family uses the space.
Extend Lifespan
Small problems become big ones fast. Fixing rot, loose boards, and water intrusion before they spread keeps your deck standing for decades.
Uniform Finish
New boards and replaced fasteners are part of the job, so when we sand and stain, everything gets treated the same. No visible repairs or patches.
Code Compliance
Railing height, baluster spacing, and fastener specs exist for safety. We ensure your deck meets current building codes.
Board & Plank Repair
Decks and fences are only as strong as their weakest board. We identify, repair, and replace compromised wood before any finishing begins.
We probe with an awl and inspect for rot, checking internal decay that a surface glance would miss. Compromised boards get marked and prioritized.
Rather than replacing entire decks, we replace only the damaged sections. New boards are installed with the correct fastener spacing and stagger patterns.
Fastener & Joint Work
Loose boards, popped nails, and corroded fasteners get tightened or replaced before sanding so the surface is flat and safe.
Popped fasteners are driven flush or removed and replaced with corrosion-resistant stainless-steel screws. The surface should be smooth enough to walk on barefoot.
We check ledger board bolts, joist hangers, and rim board connections. Loose fasteners are re-torqued to specification.
Fascia & Trim Repair
Damaged or missing fascia boards expose the structure beneath to weather. We repair or replace trim so water sheds properly and your deck stays dry underneath.
Rotted or split fascia is removed and replaced with pressure-treated lumber or composite matching your existing material.
We check flashing at ledger board and beam pockets to ensure water runs away from the structure. Missing or damaged flashing is replaced.
Railing & Baluster Repair
Cracked, split, or damaged pickets and railings are safety hazards and eyesores. We address them before finishing so your deck is both beautiful and code-compliant.
Warped or split pickets are removed and new ones installed with proper spacing and fastening. Existing pickets are sanded smooth with the rest of the surface.
Loose connections between posts and rails are tightened. Missing caps or trim are fabricated and installed to code.
Frequently asked.
Does Your Deck Need Structural Work?
Free on-site inspection and estimate. We'll identify what needs fixing and what can wait.