Skip to main content
Deck restoration process
Deck Restore+
HOW WE WORK

Four steps.
No shortcuts.

Every project moves through the same disciplined sequence, whether it's a small backyard deck or a full property restoration. When boards need more help, minor repairs and resurfacing fold right in.

01 Cleaning02 Stripping03 Sanding04 Staining
01

Wood Cleaning

Proper cleaning is the foundation everything else depends on. Skip it or rush it, and no stain, no matter how expensive, will hold.

Chemical Sanitation

Specialized solutions penetrate wood fibres and break down mold, algae, and moss at a molecular level, not a surface rinse. Safe for your plants, pets, and family.

Optimal Power Washing

Commercial-grade equipment calibrated to your wood species and existing finish. Enough pressure to flush out contaminants; not enough to raise the grain or gouge soft fibres.

Prevents Slips & Falls
Better Stain Adhesion
Prevents Mold Regrowth
Wood Cleaning
02

Stain Stripping

Old product sitting on top of wood is a barrier, not a base. Before any new stain goes down, the old one has to come off cleanly.

Eco-Friendly Strippers

We use chemical strippers that are safe for pets, plants, and people. No harsh solvents, no scorching. Applied with dwell time to break the bond between finish and wood.

Selective Removal

We identify whether your existing finish is penetrating or film-forming before choosing the removal method. The right stripper for the right product, every time.

Removes Stubborn Coatings
Fits Into Cleaning Process
Cost-Effective
Stain Stripping
03

Sanding

Sanding opens the wood grain so stain absorbs deep and locks in. The result is a smooth, splinter-free surface your family uses barefoot.

Commercial Sanding Equipment

Orbital and belt sanders for the field. An even scratch pattern from board to board means an even finish. No blotchy absorption, no lap marks.

Hand Work Where It Counts

Railings, balusters, stair stringers, and post faces are sanded by hand. Every surface you see and touch gets the same attention as the deck field.

Optimal Stain Penetration
Smoother, Safer Surface
Extended Lifespan
Sanding
04

Staining & Sealing

The finish you choose determines how your wood looks and how long it holds up. We help you pick the right product and apply it right.

Penetrating Oil-Based Stains

Our primary recommendation: oil-based stains soak into the wood fibre rather than sitting on top. Better moisture resistance, no peeling, more natural look. We primarily use Benjamin Moore Woodluxe.

Solid Stains & Clear Seals

For heavily weathered wood needing full coverage, we use solid-colour stains. For natural-wood lovers who want protection without colour change, clear penetrating sealers are available.

Long-Lasting Protection
Seven Colour Options
Prevents Moisture Damage
Staining & Sealing
WHEN NEEDED

Plus two more when the job calls for it.

Minor Repairs

Minor Repairs

Loose boards, popped nails, split pickets, and damaged fascia are addressed before any product goes down. Small repairs caught early prevent major failures later.

Board Replacement
Fastener Tightening
Fascia Repair
Deck Resurfacing

Deck Resurfacing

When boards are too far gone to sand and stain, resurfacing with new deck boards is the right call. We handle the carpentry and the finishing. One crew, start to finish.

New Deck Boards
Matched Finish
One-Crew Job
READY TO START

Ready to get started?

Free on-site estimate. No pressure. We come to you anywhere from Niagara to Oakville.

Get Free Quote →See Our Work →
Get Free Quote